All Products

Best For: Preventing Excavation Damage with a Last Chance Warning

Key Feature: Anti-Shearing Core which allows the tape to pull fully to the surface without shearing underground.

Specs & Variations:
> Available Widths: 4", 6", 12"
> Detectable?: Optionally
> Installation Method: Open Trench
> Tensile Strength: 3,000 lbf*

*Tensile strength with embedded core material, not film alone.

Best For: Preventing Excavation Damage for Lines Greater Than 12"

Key Feature: Increased visibility due to Signaltape® Technology combined with black and yellow warning stripes.

Specs & Variations:
> Available Width: 20"
> Detectable?: Optionally
> Installation Method: Open Trench
> Tensile Strength: 3,000 lbf*

*Tensile strength with embedded core material, not film alone.

Best For: Detectable Marking Tape Designed to Last

Key Feature: Greater durability than traditional foil based detectable tapes due to embedded, jacketed tracer wire.

Specs & Variations:
> Available Widths: 4", 6", 12"
> Detectable?: Yes
> Installation Method: Open Trench
> Tensile Strength: 180 lbf-720 lbf*

*Dependent on width & tracer wire used.

Best For: Providing Reliable Identification for HDD Installed Utilities

Key Feature: Enhanced durability due to embedded, jacketed tracer wire alongside high-strength fiber core.

Specs & Variations:
> Available Width: 4"
> Detectable?: Yes
> Installation Method: HDD
> Tensile Strength: 3,000 lbf*

*Tensile strength with embedded core material, not film alone.

Best For: Facilitating locates with utility specific RF frequencies that are not prone to bleed off and do not require use of transmitters.

Key Feature: RF Markers are embedded every 8 feet between two layers of durable film. Option to add Signaltape® Technology with the 7900-XT Series.

Specs & Variations:
> Available Widths: 4". 6", 12"*
> Detectable?: Yes
> Installation Method: Open Trench
> Tensile Strength: 360-3,000 lbf**

*Four- and twelve-inch widths available only with Signaltape® (XT) Technology. **Dependent on chosen variation.

Best For: Detering damage to lines located temporarily above ground by increasing visibility.

Key Feature: Preloaded pull tape makes for a simple installation and custom legends allow for clear communication in the field.

Specs & Variations:
> Available Width: 6"
> Detectable?: Optionally
> Installation Method: Above Ground (Temporary) and/or Below Ground (Permanent)
> Tensile Strength: 720 lbf*

*Tensile strength based on single layer of film.

Best For: Labeling for Hazardous Areas or Special Events

Key Feature: Digitial printing option allows for custom legends with full color custom graphics and text.

Specs & Variations:
> Available Widths: 3", 4", 6"
> Detectable?: No
> Installation Method: Above Ground
> Tensile Strength: 180-360 lbf*
‍

*Dependent on width.